TA298 Indoor Outdoor Digital Thermometer and Hygrometer with Alarm Clock in Bangladesh
The main functions of TA298 Digital Thermometer and Hygrometer are temperature, humidity and time simultaneously. Indoor Outdoor Digital Thermometer and Hygrometer is widely used for the measurement of the temperature and humidity in houses, offices, laboratory, greenhouse, schools, warehouses, production places, garments factory etc.
Features and Advantages of Room Temperature Meter:
- Light weight and portable.
- Compact design, easy to carry.
- Temperature / humidity display.
- Celsius / Fahrenheit display switch.
- Simple home icon readout to indicate moisture level of comfort.
- Check the maximum or minimum temperature and the humidity.
- Combined Temperature and humidity meter, easily readable display.
- One cable with probe for the measurement of the outdoor temperature.
- Memory or remove the maximum / minimum temperature and humidity.
- Ideal household decoration for ensuring you the most desirable ambient temperature and humidity.
- Indoor and outdoor temperature simultaneously display also registers daily temperature and humidity.
- Considerate design for installation. One hold and a stand back of the thermometer for easy hanging on the wall or standing on the desk.
Specifications of TA298 Hygrometer:
- Model: TA298
- Material: ABS
- Color: White
- Indoor Temperature Range: 0°C~+50°C (32°F~122°F)
- Outdoor Temperature Range: -40°C~+70°C (-40°F~+158°F)
- Temperature Accuracy: 0.1°C (0.1°F)
- Humidity Range: 10%~99%RH
- Humidity Accuracy: ±5%RH
- Humidity Resolution: 1%
- Power Supply: 1 x 1.5V AAA Battery (Not Included)
- Product Size: 15 x 8.8 x 2.5cm (L x W x H)
- Display Size: 6.6 x 9.2cm
- Cable Length: 1.5M/5Ft
- Origin: China
- Warranty: Nil
- 1pcs Temperature and Humidity Meter
Press the C / F button for conversion of Celsius and Fahrenheit. ADJ button for 12/24 hour conversion. The MAX / MIN key to see displays the maximum and minimum temperature and humidity. When it displays MAX or MIN, press CLEAR once to clear the memory of the previous temperature and humidity, after 8 seconds it will automatically start to re-sensor.
Press MODE button for 2 seconds in normal display status, minute digit will flash, press ADJ to debug minutes, then press the MODE button, the hour digit will flash, press the ADJ to debug hours, after that press MODE once again it will get back to normal operation. Press MODE button once, it will display set time, long press MODE button, minute digit will flash, press ADJ to debug minutes, then press the MODE key once, the hour digit will flash, press ADJ button to debug hours, after that press MODE twice it will get back to normal operation.